Commentaires sur : Eteindre son Raspberry avec un Bouton sur GPIO https://blog.f8asb.com/2020/04/17/eteindre-son-raspberry-avec-un-bouton-sur-gpio/ Promouvoir est notre devoir ... Sun, 23 Aug 2020 07:05:36 +0000 hourly 1 Par : f8asb https://blog.f8asb.com/2020/04/17/eteindre-son-raspberry-avec-un-bouton-sur-gpio/#comment-2723 Sun, 23 Aug 2020 07:05:36 +0000 http://blog.f8asb.com/?p=6001#comment-2723 En réponse à Georg Rensonet, DD8ZX.

No, 2pin isn’t for reset button but to connect electret microphone directly ( no tested for futur project, hotspot without radio)
To reboot you can directly connect on 2 pin on raspberry or on the button,

]]> Par : Georg Rensonet, DD8ZX https://blog.f8asb.com/2020/04/17/eteindre-son-raspberry-avec-un-bouton-sur-gpio/#comment-2721 Wed, 19 Aug 2020 22:42:49 +0000 http://blog.f8asb.com/?p=6001#comment-2721 Hi,
on my svxcard there is a 2 pin jumper next to the shutdown button. Can I connect just a momentary switch to this jumper and shutdown the Pi when mounted in a box? I did not dare to short the 2 pins for a test, not knowing if I break something, if it is not for the purpose of connecting a switch.
73
Georg, DD8ZX

]]>